Warping Helpers plus extension - For larger Looms
You will receive a set of two connectors. One for each end of your lease sticks.
Approximate total length when snapped at both ends as of it was wrapped around the front and back beams is 37” If you have a set made before 2022 they may be 35-36” when snapped at both ends.
The loop that goes around the beams is 7 1/2 in diameter.
Snaps are spaced to be adjustable to help you find the best fit for you loom.
You may want to measure your loom to make sure these will work.
These have been used on the following floor looms: Schacht, Macomber, LeClerc, Louet, Gilmore, Norwood, Harrisville
For some looms: Toika, Glimakra, Pendleton, Large Macomber, Schacht Floor loom, or Louet Spring and Delta when using the raddle on top, or maybe some others. If you have one of these looms you may want to order the Warping Helper with the Extension. These extensions will each have an additional male snap and extra D-ring.
The extensions will add another 17” to the length, with snaps for adjusting as needed.
I recently had a request about using this on a table loom. You need to wrap it twice around the beam to make these smaller.
Here is a link to a video
This link shows how these can be connected to back and front on a Baby Wolf loom
Another video
You will receive a set of two connectors. One for each end of your lease sticks.
Approximate total length when snapped at both ends as of it was wrapped around the front and back beams is 37” If you have a set made before 2022 they may be 35-36” when snapped at both ends.
The loop that goes around the beams is 7 1/2 in diameter.
Snaps are spaced to be adjustable to help you find the best fit for you loom.
You may want to measure your loom to make sure these will work.
These have been used on the following floor looms: Schacht, Macomber, LeClerc, Louet, Gilmore, Norwood, Harrisville
For some looms: Toika, Glimakra, Pendleton, Large Macomber, Schacht Floor loom, or Louet Spring and Delta when using the raddle on top, or maybe some others. If you have one of these looms you may want to order the Warping Helper with the Extension. These extensions will each have an additional male snap and extra D-ring.
The extensions will add another 17” to the length, with snaps for adjusting as needed.
I recently had a request about using this on a table loom. You need to wrap it twice around the beam to make these smaller.
Here is a link to a video
This link shows how these can be connected to back and front on a Baby Wolf loom
Another video
You will receive a set of two connectors. One for each end of your lease sticks.
Approximate total length when snapped at both ends as of it was wrapped around the front and back beams is 37” If you have a set made before 2022 they may be 35-36” when snapped at both ends.
The loop that goes around the beams is 7 1/2 in diameter.
Snaps are spaced to be adjustable to help you find the best fit for you loom.
You may want to measure your loom to make sure these will work.
These have been used on the following floor looms: Schacht, Macomber, LeClerc, Louet, Gilmore, Norwood, Harrisville
For some looms: Toika, Glimakra, Pendleton, Large Macomber, Schacht Floor loom, or Louet Spring and Delta when using the raddle on top, or maybe some others. If you have one of these looms you may want to order the Warping Helper with the Extension. These extensions will each have an additional male snap and extra D-ring.
The extensions will add another 17” to the length, with snaps for adjusting as needed.
I recently had a request about using this on a table loom. You need to wrap it twice around the beam to make these smaller.
Here is a link to a video
This link shows how these can be connected to back and front on a Baby Wolf loom
Another video
FREE SHIPPING TO LOCATIONS IN THE USA.
If for any reason if you are unhappy with your purchase please contact me and we can discuss either a replacement, return or if a refund is preferred.